4 Stage Value Plus 75GPD RO/DI System - Bulk Reef Supply
Bulk Reef SupplyBRS 4 Stage Systems are perfect for reefers who have water treated with chlorine or relatively clean well water. The 4 stage systems are self-contained on a single bracket making them ideal for tight spaces or where a non-permanent connection may be required. Installing a RO/DI system only takes a few minutes and can be done very easily without any permanent modifications to your home or the plumbing.
4 Stage Plus RO/DI Features:
- Dual TDS Meter
- Glycerin Filled Pressure Gauge
- Pre-installed Automatic shut-off valve
- Pre-installed Flush Kit
- Multiple source water connections
- Drain/waste water connections
- Mur-lok Push Connect dual EPDM O-Ring fittings
- 10 Ft Each of 1/4" Blue, Red and Black Tubing
- Pre-installed NSF Certified Filters
All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.
Bulk Reef Supply RO/DI systems only use the latest filters and components in Reverse Osmosis technology. We have designed our RO/DI units especially for reef tanks, but they can produce perfect water for other types of saltwater and freshwater aquariums too. If you have a well, or you are connected to city water we provide a variety of RO/DI systems that will fit your aquarium's needs.
4 Stage RO/DI Systems - Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants.
5 Stage RO/DI Systems - Our most popular system handles most types of well water along with most types of city water treated with chlorine including small amounts of chloramines.
6 Stage RO/DI Systems - If you are not sure what is in your water, or it contains excessive amounts of TDS or hard to remove contaminants like chloramines, phosphates, nitrates, silicates, etc. The BRS 6 Stage systems are designed to treat any water your home may have effectively. The Dual DI stage helps with the hard to remove ions like ammonia, phosphates, silicates, etc.
4 Stages of Filtration
Stage 1
Purtrex 5 Micron Depth Sediment Filter
Sediment filters trap debris and other free-floating particles that would normally clog expensive carbon blocks and foul membranes. Purtrex filters are an actual depth filter with a graded density that progressively gets tighter through as water passes through the filter allowing them to last longer than the competitors.
Stage 2
BRS 5 Micron VOC Block (Chlorine 15,000 @ 1 GPM)
Our VOC carbon blocks are specially formulated to remove and reduce chlorine and volatile organic compounds from household water.
Stage 3
75 GPD Dow Filmtec Membrane (up to 99% rejection rate*)
DOW is hands down the industry leader for residential RO membranes. The 75 GPD Filmtec membrane can remove up to 99% of contaminants from traditional household drinking water. All membranes do require pressure to operate correctly, and DOW's membrane only requires 50 PSI of feed pressure to operate efficiently.
Stage 4
Nuclear Grade Color-Changing Deionization Resin
Deionization resin is the final stage of the RODI system and can polish your water down to 0 TDS. The DI resin is a mixed bed with a color changing indicator to let you know when it is becoming depleted. The resin starts as a dark blue color that will turn gold when as it becomes exhausted and is a good indicator to let you know when to start looking at your TDS meter.
BRS 4 Value Plus RO/DI Systems | |
---|---|
Gallons Per Day |
75, 100, 150, or 200
|
Sediment Filter |
Purtrex 5 Micron Depth Sediment Filter
|
Carbon Block |
BRS VOC 5 Micron Carbon Block
|
Membrane |
75 or 100 GPD Dow Filmtec Membrane |
Deionization |
Single Mixed Bed DI Stage with Refillable Cartridge |
Auto Shut Off Valve |
Yes
|
Canister Wrench |
Yes
|
Laundry Tub Connection Adapter |
Yes
|
Chrome Faucet Diverter Valve |
Yes
|
Glycerin Filled Pressure Gauge |
Yes |
Flush Kit |
Yes
|
Dual Inline TDS Meter |
Yes
|
Dimensions | 16" x 7" x 15.5" |
4 Stage Plus RO/DI System Recommended Conditions:
- Minimum Water Pressure - 50 PSI
- Max Water Pressure - 90 PSI
- Recommended Water Temperature - 77°F
- Recommended Max TDS - <300 ppm
Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production of product water, with excess production of waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.
*DOW Filmtec 75 GPD Membranes have a 96% - 99% typical stabilized salt rejection rate that can be reproduced through the following conditions;
- Source Water Pressure - 50 PSI / Membrane
- Source Water Temperature - 77°F
- Source Water TDS - 250ppm Softened Tap Water
- Recovery - 15%
- Minimum Salt Rejection - 96%
- SKU:
- 210773
- UPC:
- 853710007742
- Aquarium Type:
- Saltwater, Freshwater
- Stages:
- 4 Stage
- Production Rate:
- 75 Gallons per Day
- Included Filters:
- Sediment Filter, Carbon Block, RO Membrane, DI Resin (Mixed Bed)
- Waste : Product Water:
- Standard (3:1)
- Dimensions:
- 16 x 7" x 15.5"
- Filter Dimensions:
- 10 in. x 2.5 in. (Standard)
- Tubing Length:
- 10 Ft Each of 1/4 Blue, Red and Black Tubing
- Carbon Block Type:
- Chlorine
- Sediment Filter Type:
- True Gradient Technology
- Membrane GPD:
- 75
- Micron Rating:
- 5
- Resin Type:
- Color Changing
- Water Supply Connections:
- Faucet Diverter Valves, Garden Hose / Laundry Tub
- Included Accessories:
- Flush Kit, Pressure Gauge, TDS Meter, Faucet & Garden Hose Connections
- Warranty:
- BRS Limited Lifetime Warranty
- TDS Meter Type:
- Dual
- Primary Benefits:
- Space-Saving / Portable
- Primary Benefits:
- High Efficiency
- Primary Benefits:
- Low Cost Upfront
- Water Source:
- City - Chlorine
- Water Source:
- Well - Low Pollutants
- Categories:
- 4 Stage RO/DI Systems