5 Stage Premium 150 GPD Water Saver RO/DI System - Bulk Reef Supply

Makes up to 150 Gallons of RODI Water Per Day!

BRS 5 Stage Systems are our most popular systems and are great for a majority of wells, along with city water that is treated with chlorine, or small amounts of chloramines. The single Color Changing DI stage comes on its own bracket allowing you to customize the installation depending on the space you have available. Every BRS RODI system can be installed within minutes with the easy to use Mur-lok push-connect fittings that allow you to make leak-free connections. 

5 Stage Value Water Saver RO/DI Features:

• Produce 0 TDS water
• Minimal waste water
• Dual Universal Carbon Blocks
• Multiple source water connections
• Mur-lok Push Connect dual EPDM O-Ring fittings
• 10 Ft Each of 1/4" Blue, Red and Black Tubing
• Pre-installed NSF Certified Filters

All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.

Bulk Reef Supply RO/DI systems only use the latest filters and components in Reverse Osmosis technology. We have designed our RO/DI units especially for reef tanks, but they can produce perfect water for other types of saltwater and freshwater aquariums too. If you have a well, or you are connected to city water we offer a variety of RO/DI systems that will fit your aquarium's needs.

4 Stage RO/DI Systems - Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants. Four stage RODI systems are a great solution if you only connect your RODI system temporarily or have little space to dedicate to storing a RODI system.

5 Stage RO/DI Systems - Our most popular systems handle common impurities found in well water along with most types of city water treated with chlorine including small amounts of chloramines.

6 Stage RO/DI Systems - If you are not sure what is in your water, or it contains excessive amounts of TDS or hard to remove contaminants like chloramines, phosphates, nitrates, silicates, etc. The BRS 6 Stage systems are designed to effectively treat any water your home may have prior to using it in your aquarium. The Dual DI stage helps with the hard to remove ions like ammonia, phosphates, silicates, etc.

5 Stages of Filtration

Stage 1

GE ROSave.Z 1 Micron Depth Sediment Filter 

Made in the USA and made for Reverse Osmosis applications and will last up to twice as long as other conventional depth sediment filters. The longer lasting filters help protect the more expensive carbon blocks allowing you to save money. 

Stage 2 & 3

BRS 1 Micron Universal Carbon Block  (Chlorine 35,000@1 GPM / Chloramines 3,500@0.5 GPM)

Our Universal Carbon Blocks are manufactured with high-quality catalytic active carbon that is then extruded with up to 30% more carbon than standard carbon blocks. These blocks are excellent at removing VOC, chlorine, and chloramines. 

Stage 4

Dual 75 GPD Dow Filmtec Membrane  (up to 99% rejection rate*)

1.5:1 Waste to Product Water Ratio

DOW is hands down the industry leader for residential RO membranes and when using two membranes, the output can be doubled without the need for any additional waste water over a single membrane. The 75 GPD Filmtec membrane can remove up to 99% of contaminants from traditional household drinking water. All membranes do require pressure to operate correctly, and DOW membranes in a water saver configuration require 65 PSI of feed pressure to operate efficiently.

Stage 5

Nuclear Grade Color Changing Deionization Resin

Deionization resin is the final stage of the RODI system and can polish your water down to 0 TDS. The DI resin is a mixed bed with a color changing indicator to let you know when it is becoming depleted. The resin starts as a dark blue color that will turn gold when as it becomes exhausted and is a good indicator to let you know when to start looking at your TDS meter.

5 Stage Value 150 GPD RO/DI System Recommended Conditions:

• Minimum Water Pressure - 65 PSI
• Max Water Pressure - 90 PSI
• Recommended Water Temperature - 77°F
• Recommended Max TDS - <500 ppm
• Waste to Product Water Ratio - 1.5:1

Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.

*DOW Filmtec 75 GPD Membranes have a 96% - 99% typical stabilized salt rejection rate that can be reproduced through the following conditions;

• Source Water Pressure - 50 PSI / Membrane (65 PSI for Water Saver systems)
• Source Water Temperature - 77°F
• Source Water TDS - 250ppm Softened Tap Water
• Recovery - 15%
• Minimum Salt Rejection - 96%

Click for BRS 5 Stage RO/DI System Instructions